Tecnocoat

Free Quote Call (0404) 66111

Tecnocoat

Hot spray coatings

TECNOCOAT products are a range of high quality waterproof membranes produced by subjecting their liquid component to high temperatures and pressure. Their excellent mechanical properties have made them one of the most widely used membranes for construction work involving demanding technical specifications.

tecnocoat-p2049

Polyurea membrane 100% pure for waterproofing and coating

The 100% pure polyurea TECNOCOAT P-2049 system was developed as a coating suitable for waterproofing, protection and sealing in general. It's made up of two high reactive liquid components, isocyanates and amines, which are mixed together using spray equipment, to form an aromatic, continuous, without joints, high density, solid and elastic pure polyurea, with high mechanical and chemical resistance qualities.

It has CE marking on the basis of a statement made DoP Declaration of Performance (DoP) conforms to the regulations UE305/2011. Declaration is available on demand. TECNOCOAT P-2049 has an european technical approval ETA 11/357 and BBA 16/5340 (W3: working life 25 years, 1,4 mm minimum thickness).

Tecnocoat-p-2049

tecnocoat-p2049

Stretchable polyurea membrane 100% pure for waterproofing and coating (>600%)

The 100% pure and elastic polyurea TECNOCOAT P-2049 EL system was developed as a single coating suitable for waterproofing, protection and sealing, especially in elements with structural movements.The pure polyurea TECNOCOAT P-2049 EL membrane is made up of two high reactive liquid components, isocyanates and amines, which are mixed together using spray equipment. TECNOCAOT P-204 EL is an aromatic high density and elasticity pure polyurea and excellent elasticity.

Tecnocoat-p-2049-el

tecnocoat-p2049

Low viscosity polyurea membrane 100% pure for waterproofing and coating

The 100% pure polyurea TECNOCOAT P-2049 LV membrane was developed as a coating suitable for waterproofing, protection and sealing in general. The pure polyurea TECNOCOAT P-2049 LV membrane is made up of two high reactive liquid components, isocyanates and amines, which are mixed together using spray equipment we can supply, to form an aromatic, continuous, without joints, high density, solid and elastic pure polyurea, for protecting polyurethane foam

Tecnocoat-p-2049-lv

tecnocoat-p2049-ex

Highly expandable 100% pure polyurea membrane for waterproofing, with thermal behavior

TECNOCOAT P-2049 EX has developed as a single coating suitable for waterproofing, thermal isolation, protection and sealing in general. It forms a continuous and solid, continuous, and protective coating without joints or overlaps. This polyurea once applied, expands between 5 and 7 times its volume. The pure polyurea TECNOCOAT P-2049 EX membrane is made up of two high reactive liquid components, isocyanates and amines, which are mixed together using spray equipment we can supply.

Tecnocoat-p-2049-ex

tecnocoat-cp2049

Cold polyurea membrane for waterproofing and coating

The cold polyurea TECNOCOAT CP-2049 is a two component polyurea, that once applied, forms a continuous, solid, 100% waterproof membrane without joints or overlaps and completely adhered to support. Suitable for waterproofing, protection and sealing in general. Due to its cold and manual application, is ideal too for repair or recoting on top of our polyurea membranes range, once these are already catalyzed.

Tecnocoat-cp-2049