Tecnocoat P-2049 CP
TECNOCOAT P-2049 CP
Cold polyurea membrane for waterproofing and coating
The cold polyurea TECNOCOAT CP-2049 is a two component polyurea, that once applied, forms a continuous, solid, 100% waterproof membrane without joints or overlaps and completely adhered to support. Suitable for waterproofing, protection and sealing in general. Due to its cold and manual application, is ideal too for repair or recoting on top of our polyurea membranes range, once these are already catalyzed.
Uses
For waterproofing and protection of:
- Walkable roofs
- Terraces, balconies and overhangs
- Asbestos roofs
- Metal roofs
- To repair/recoaing the TECNOCOAT membranes range
NOTE: call our technical department about the application to other supports or situations
| recommended thickness | ± 2 mm |
| pot life at 23ºC | ± 20~25 minute |
| application method | by roll or squeeze |
| hardness Shore A at 23ºC | >85 |
| elongation at break at 23ºC | >500% |
| tensile strength at 23ºC | ±6~9 MPa |
| application method | spray equipment |
Main Menu
